• Banner

Lock Nut Hydraulic Cylinder CLP150SA150LN
  • Lock Nut Hydraulic Cylinder CLP150SA150LN
  • Lock Nut Hydraulic Cylinder CLP150SA150LN

Lock Nut Hydraulic Cylinder CLP150SA150LN

0651
Machaon
Capacity 150 t, Stroke 150 mm
  Security policy

(edit with the Customer Reassurance module)

  Delivery policy

(edit with the Customer Reassurance module)

  Return policy

(edit with the Customer Reassurance module)

Description

The CLP150SA150LN lock nut cylinder is the most powerful version in this series and the one with the widest range of motion. It is designed for demanding jobs in which very heavy loads must be lifted and a part moved further.

Combining 150 tons of force with a 150 mm stroke suits specialist work on heavy structures, machinery and industrial components. The lock nut mechanically supports the load once the required position is reached.

Advantages of the cylinder:

  • lock nut that mechanically supports the raised load
  • can be used in any spatial position
  • made of high-strength alloy steel
  • chrome-plated piston prevents corrosion and early wear
  • wiper ring inside the cylinder keeps contaminants out of the system
  • the outer surface is coated with a special enamel
  • after production, every cylinder is tested at 1,25 times the rated load (125%)
  • every cylinder has a flat, grooved saddle

Application:

The version with the longest stroke in the series is the right choice wherever the shorter 50 and 100 mm ranges do not give enough working travel, and the 150 t force allows use with exceptionally heavy loads. It is intended for the most demanding specialist industrial, assembly, service and repair jobs.

Included:

  • CH1.M quick coupler (male)

Technical data:

  • Capacity, t - 150
  • Stroke, mm - 150
  • Weight, kg - 80

Complete dimensions and parameters are in the Models and specifications tab.

A hydraulic pump with a pressure of 700 bar is required. Check the compatible pumps available in our offer. At lower pressure the force is proportional to the pressure (e.g. at 350 bar it is approx. 50% of the nominal value).

The CLP150SA150LN lock nut hydraulic cylinder is covered by a 12-month warranty.

Note: The cylinder photos are illustrative and may not match this exact model.

Product Details
0651

Data sheet

Capacity, ton
150
Stroke, mm
150
Type
Single-Acting

Specific References

EAN13
5904326300651
Models and specifications

Note: The load and lifting height values listed here are the maximum safe values. For practical reasons, it is recommended not to exceed 80% of these rated values!
Model Capacity, t Stroke, mm Oil Capacity, cm³ A, mm D, mm E, mm F, mm Weight, kg Lifting Point
CLP10SA50LN 10 50 90 144 68 45 45 4 none
CLP10SA100LN 100 170 194 5,5 handle
CLP10SA150LN 150 255 244 7
CLP20SA50LN 20 50 168 148 83 60 60 7 none
CLP20SA100LN 100 316 198 9 handle
CLP20SA150LN 150 467 248 11,5
CLP30SA50LN 30 50 248 156 103 75 75 9,5 handle
CLP30SA100LN 100 475 206 13
CLP30SA150LN 150 706 256 15,5
CLP50SA50LN 50 50 406 164 123 95 95 14,5 handle
CLP50SA100LN 100 773 214 19
CLP50SA150LN 150 1147 264 23
CLP100SA50LN 100 50 797 186 168 135 135 31 eye bolt
CLP100SA100LN 100 1548 236 39
CLP100SA150LN 150 2300 286 48
CLP150SA50LN 150 50 1168 210 205 165 165 54 eye bolt
CLP150SA100LN 100 2273 260 67
CLP150SA150LN 150 3377 310 80
CLP200SA50LN 200 50 1502 245 228 190 190 81 eye bolt
CLP200SA100LN 100 2955 295 98
CLP200SA150LN 150 4408 345 114

Pump selection (smallest suitable pump):

6 other products in the same category:
You might also like