• Banner

Lock Nut Hydraulic Cylinder CLP100SA50LN
  • Lock Nut Hydraulic Cylinder CLP100SA50LN
  • Lock Nut Hydraulic Cylinder CLP100SA50LN

Lock Nut Hydraulic Cylinder CLP100SA50LN

0606
Machaon
Capacity 100 t, Stroke 50 mm
  Security policy

(edit with the Customer Reassurance module)

  Delivery policy

(edit with the Customer Reassurance module)

  Return policy

(edit with the Customer Reassurance module)

Description

The CLP100SA50LN lock nut cylinder is for professional use where lifting very heavy loads matters most and the piston range needed is small. The short stroke focuses the cylinder on jobs that need high force over a limited lifting range.

The lock nut mechanically supports the load after it is raised. It is useful in demanding jobs where a heavy part has to stay in a fixed position.

Advantages of the cylinder:

  • lock nut that mechanically supports the raised load
  • can be used in any spatial position
  • made of high-strength alloy steel
  • chrome-plated piston prevents corrosion and early wear
  • wiper ring inside the cylinder keeps contaminants out of the system
  • the outer surface is coated with a special enamel
  • after production, every cylinder is tested at 1,25 times the rated load (125%)
  • every cylinder has a flat, grooved saddle

Application:

The 100 t / 50 mm model is for work on heavy structures, machinery and other parts that need very high hydraulic force. It is intended for specialist jobs in which very heavy parts are lifted a short distance, and the short stroke is particularly useful where working space is limited.

Included:

  • CH1.M quick coupler (male)

Technical data:

  • Capacity, t - 100
  • Stroke, mm - 50
  • Weight, kg - 31

Complete dimensions and parameters are in the Models and specifications tab.

A hydraulic pump with a pressure of 700 bar is required. Check the compatible pumps available in our offer. At lower pressure the force is proportional to the pressure (e.g. at 350 bar it is approx. 50% of the nominal value).

The CLP100SA50LN lock nut hydraulic cylinder is covered by a 12-month warranty.

Note: The cylinder photos are illustrative and may not match this exact model.

Models and specifications

Note: The load and lifting height values listed here are the maximum safe values. For practical reasons, it is recommended not to exceed 80% of these rated values!
Model Capacity, t Stroke, mm Oil Capacity, cm³ A, mm D, mm E, mm F, mm Weight, kg Lifting Point
CLP10SA50LN 10 50 90 144 68 45 45 4 none
CLP10SA100LN 100 170 194 5,5 handle
CLP10SA150LN 150 255 244 7
CLP20SA50LN 20 50 168 148 83 60 60 7 none
CLP20SA100LN 100 316 198 9 handle
CLP20SA150LN 150 467 248 11,5
CLP30SA50LN 30 50 248 156 103 75 75 9,5 handle
CLP30SA100LN 100 475 206 13
CLP30SA150LN 150 706 256 15,5
CLP50SA50LN 50 50 406 164 123 95 95 14,5 handle
CLP50SA100LN 100 773 214 19
CLP50SA150LN 150 1147 264 23
CLP100SA50LN 100 50 797 186 168 135 135 31 eye bolt
CLP100SA100LN 100 1548 236 39
CLP100SA150LN 150 2300 286 48
CLP150SA50LN 150 50 1168 210 205 165 165 54 eye bolt
CLP150SA100LN 100 2273 260 67
CLP150SA150LN 150 3377 310 80
CLP200SA50LN 200 50 1502 245 228 190 190 81 eye bolt
CLP200SA100LN 100 2955 295 98
CLP200SA150LN 150 4408 345 114

Pump selection (smallest suitable pump):

6 other products in the same category:
You might also like