(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
One cordless tool, three jobs: the UTA-6 crimps cable lugs, cuts power cable and punches holes in sheet metal. The working heads are held on the body by magnetic pins, so swapping one for another takes only a few seconds.
Crimps lugs and ferrules from 16 to 300 mm² with a hexagonal crimp profile. The head tilts open for quick changing of the crimping dies.
Cuts any type of armored power cable up to 50 mm in diameter. It is not suitable for bare AFL (ACSR) conductors. The head is open, so placing the cable is easy.
Punches holes in thin sheet metal, for example for control and measuring equipment in electrical cabinets, leaving smooth edges. A 10 mm pilot hole is needed for the punch and die. The head turns 330° horizontally on the body, and its working part turns 360° vertically.
Other hole shapes for the punching head are available separately: round, square, rectangular.
The UTA-6 cordless universal press is covered by a 12-month warranty.
| Model | Dies in the set, mm² | Force, t | Die gap, mm* | Weight, kg** | Package size, cm |
|---|---|---|---|---|---|
| Cordless cable crimpers | |||||
| CTA-300 | 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300 | 6 | 14 | 3,25 | 70×32×12 |
| CTA-300.1 | 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300 | 11 | 14 | 4,85 | 58×50×17 |
| CTA-300.2 | 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300 | 11 | 20 | 5,45 | 58×50×17 |
| CTA-400 | 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400 | 11 | 42 | 6,55 | 58×50×17 |
| CTA-400.1 | 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400 | 11 | 24 | 6,15 | 58×50×17 |
| Hydraulic cable crimpers | |||||
| CTS-70 | 6, 10, 16, 25, 35, 50, 70 | 5 | 12 | 2,8 | 35×18×8 |
| CTS-120 | 10, 16, 25, 35, 50, 70, 95, 120 | 7 | 13 | 4,5 | 43×19×9 |
| CTS-240 | 16, 25, 35, 50, 70, 95, 120, 150, 185, 240 | 5 | 10 | 5,3 | 45×29×9 |
| CTH-240S | 16, 25, 35, 50, 70, 95, 120, 150, 185, 240 | 9 | 20 | 14 | 20×20×38 |
| CTS-300 | 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300 | 9 | 17 | 6,5 | 54×24×12 |
| CTS-300.1 | 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300 | 11 | 17 | 7,5 | 54×24×12 |
| CTS-300.2 | 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300 | 11 | 11 | 9,5 | 54×24×12 |
| CTS-300.3 | 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300 | 11 | 14 | 7,8 | 54×24×12 |
| CTS-300.4 | 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300 | 6,5 | 14 | 9 | 63×24×12 |
| CTH-300 | 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300 | 11 | 16 | 12 | 49×26×13 |
| CTH-300.1 | 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300 | 11 | 28 | 12 | 49×26×13 |
| CTS-400 | 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400 | 14 | 18 | 15 | 63×24×12 |
| CTS-400.1 | 50, 70, 95, 120, 150, 185, 240, 300, 400 | 11 | 30 | 10 | 56×24×12 |
| CTS-400.2 | 50, 70, 95, 120, 150, 185, 240, 300, 400 | 11 | 26 | 12 | 63×24×12 |
| CTS-400.3 | 50, 70, 95, 120, 150, 185, 240, 300, 400 | 11 | 24 | 9,5 | 63×24×12 |
| CTH-400 | 70, 95, 120, 150, 185, 240, 300, 400 | 14 | 16 | 15 | 49×26×13 |
| CTH-400.1 | 50, 70, 95, 120, 150, 185, 240, 300, 400 | 11 | 30 | 9 | 42×27×13 |
| CTH-400S | 50, 70, 95, 120, 150, 185, 240, 300, 400 | 11 | 30 | 17 | 20×20×38 |
| CTH-500 | 70, 95, 120, 150, 185, 240, 300, 400, 500 | 20 | 16 | 17 | 49×26×13 |
| CTH-630 | 240, 300, 400, 500, 600 | 23 | 22 | 15 | 20×20×30 |
| CTH-1000 | 400, 500, 600, 800, 1000 | 35 | 30 | 24 | 20×20×37 |
* Die gap is the maximum distance between the dies once they are fitted in the press.
** Cordless crimpers: weight of the crimper without battery. Hydraulic crimpers: gross weight of the set.
Reference: 5496
Brand: Machaon
check_circle
check_circle